FAQ
Frequently asked questions
Technical answers about the Keiryo insert and GateMix™. Can’t find your question? Ask us directly.
The insert: design and fitting
How are the inserts made?+
In two steps. First, we design and simulate the flow channels for your material and process, within your polymer flow and pressure limits. Second, the insert, shaped to fit the empty space in your hot runner, is 3D-printed in metal and finished with high precision, down to tens of microns. This tight fit makes sure the polymer flows through the channels and does not bypass the insert.
What is the insert made of, and why?+
We use M789, a tool steel powder developed for injection-moulding tooling, matching the hardness of hot-runner and mould components. It combines strength with corrosion resistance, so the fine channel geometry stays stable under process pressures and temperatures.
How do you fit the insert into our hot runner?+
We reverse-engineer your hot-runner nozzle with CT scanning to obtain a high-precision 3D model, including the valve-gate needle. This model defines the design space, which we fill with the channels that act on the polymer. Because the design starts from your actual nozzle, the insert fits without changes to the hot runner. Your team then fits it in four steps, with minimum downtime.
Can the insert be tuned to our application?+
Yes. The channel design is tailored to what you want to achieve, the space available in your hot runner and the material you process. Each design is developed and simulated for your case.
Can it be retrofitted into existing moulds? Which hot runners are compatible?+
Yes. The insert fits into the existing space inside the hot-runner nozzle, so in most cases no new mould or hot runner is needed. Compatibility is confirmed case by case from the CT scan of your nozzle.
Does the insert interfere with the valve-gate needle?+
No. The insert geometry is designed around the CT model of the nozzle and the needle, so the needle moves as before and the gate shuts off as before.
How long does an insert last?+
Inserts run in industrial production with no longevity issues detected so far. We track this with facts, not estimates: an insert from every production batch is inspected after printing and finishing, and after a set number of injection cycles inserts are CT-scanned at high resolution (ZEISS) and compared with their as-built volume and geometry.
What is the lead time from request to installed insert?+
It depends on your project: each one includes CT scanning of the nozzle, channel design and simulation, 3D printing and high-precision finishing. Contact us and we will give you a timeline for your project.
Does the insert change our material, for example for food contact?+
No. The insert works mechanically, not chemically: it only changes how the melt flows and adds nothing to the polymer. Therefore, no additional legal clearances are needed.
Processing
What is the pressure drop with the insert?+
As with anything placed in the flow path, there is some pressure consumption. It stays within the machine’s normal operating window: in production at our partner PDG Plastiques, operators did not need to change their settings.
Does it affect cycle time?+
No. The cycle time stays the same. In our production runs, no adjustment to the cycle was needed.
Does the extra shear heat or degrade the material, for example acetaldehyde or an IV drop in PET?+
After every trial we measure the molecular weight by GPC (gel permeation chromatography) on reference samples and on samples made with the insert. As in any injection process, some degradation occurs, and it is also present in the reference. Samples made with the insert do not exceed the degradation level of the reference, nor industry norms.
Materials
Does the technology work with all materials?+
GateMix™: yes. It works mechanically, not chemically, so it can be applied to essentially any thermoplastic. FENIC: it is designed for semi-crystalline polymers such as PET, PP and PE, and semi-crystalline biopolymers such as PLA (see the FENIC page).
Does it work with recycled material? Can contamination block the channels?+
Yes. The inserts run in industrial production on PET with up to 100% recycled content, and no blockage or breakage has been reported.
GateMix™ mixing
How does the mixing work?+
Mechanically, not chemically. The melt reaches the nozzle unevenly spread. Inside the insert it is split into separate streams, squeezed into thin layers and stacked back together, again and again. This improves both distribution (spreading colourant and additives evenly) and dispersion (breaking up agglomerates). Because the insert sits right before the gate, the evenly mixed melt goes straight into the mould and freezes, with no time to separate again.
How is it different from a standard static mixer?+
Unlike off-the-shelf static mixers, the GateMix™ insert is 3D-printed and custom-designed for each nozzle, using the available space close to the gate.
How long does a colour or material change take?+
Our industrial partner runs blue, green, white and yellow on the same line and changes between them regularly, with no issues reported.
How do you measure mixing quality?+
Visually, on a statistically relevant number of preforms and bottles taken across cavities and over time, and with light transmittance measured on a spectrophotometer.
Is the effect the same in every cavity of a multi-cavity mould?+
Yes. We ran a cavity-to-cavity analysis over a production period: whatever the cavity or the time, the inserts performed the same.
Does it help with streaks, swirls or marbling?+
Yes. In PET production with different colour masterbatches, streaks and marbling were no longer visible, with at least 15% lower colourant dosage.
Does it improve the homogeneity of virgin and recycled PET blends?+
We are quantifying this in the lab first, with Prof. Savvas Hatzikiriakos (University of British Columbia), a world authority in rheology. The study tests virgin PET, recycled PET of the same IV and blends of the two, characterises them by DMA (dynamic mechanical analysis), then repeats the tests with the insert. We will share the results once they are available.
Working with Keiryo
Do we need to buy equipment?+
No capital request: you pay as you benefit. You pay for the inserts and a licence priced per 1,000 parts, with three payment options to choose from. Run the Savings Calculator to see the saving and payback for your line.
How can we run a trial?+
Book a discovery call. For GateMix™, we tune the insert to your hot runner and run the trial on your own tool against a reference without GateMix™, with success criteria agreed upfront. For FENIC, we can also run a bespoke trial in an industrial environment with your own material and moulds, which gives you data sooner than arranging a fully bespoke trial with your converter.
Do we need to share confidential information for a first call?+
No. We do not ask for any confidential information to discuss your line. Share only what you are comfortable sharing.
Is the technology protected by patents?+
Yes. Four patent families are published: three for FENIC and, for GateMix™, WO 2026/234256. A fifth family was filed in 2026. The published patents are on our home page.
Still have a question?
Ask our team on a free, no-commitment call.